UCO Lattice
UCO Lattice is a must-have decorative addition to every property owner
looking to enhance the aesthetics of their building. Versatile, inexpensive
and long-lasting, UCO Lattice is applicable to gable ends, room divider,
pergola, fencing, verandah, patio, window privacy screens, wind breaker for
barbeque areas and poolsides, as well as feature panels. Made from durable
fibre cement material, UCO Lattice can withstand weather, UV radiation and
termites, while being environmental-friendly and non-hazardous. UCO
Lattice is available in two designs – Square and Diamond.
Dimensions
|
*Approximate Weight
Areas of Application
Gable ends
Room divider
Pergola
Fencing
Veranda, patio and window privacy screens
Wind breaker for barbecue areas and pool sides
Feature panels
ATTRIBUTES
Tough yet flexible, unlikely to wrap, crack or split when installed correctly.
Durable, resilient to weather conditions. It has high impact resistance
Aesthetic woodgrain appeal, adds beauty.
Dimensionally stable, minimal moisture movement
Termite free, unlike timber product that susceptible to termite attacks.
Does not rust or corrode unlike metal and UV resistant, does not become brittle unlike WPC
Versatile in application. Light and easy to install. Accept a variety of surface finishes and suitable for all paint coatings.
Fire resistant, does not burn and physical properties not degraded by exposure to temperatures ranging from 0°c to 105°c
Water Resistant, immune to permanent water damage, rot free.
Environment friendly, green product, 100% asbestos free, non-hazardous to health
Maintenance-free, cost effective.
FIXING AND INSTALLATION
Fix UCO Lattice directly onto timber frames using galvanized fibre cement nails, 2.0mm x 30mm long for softwood and 2.0mm x 25mm for hardwood. Alternatively, metal angle and flat bar frame can also be used with bolts and nuts.
Framing should be done according to the type of applications.
- EXTERNAL APPLICATION
Timber or metal angle frame should be provided on all sides
- INTERNAL APPLICATION
Fasten securely to an existing wall using metal angle frame or directly to timber frame, 50mm x 50mm using galvanized fibre cement nails. The length of nails should be according to the type of wood used.
BUILDING PRODUCTS SPECIFICATION
EXTERNAL WALL
Install UCO Lattice 2400mm x 1220mm x 6mm, fixed directly onto G.I. channels vertically @ 610mm c/c. All joints to be expressed by 10mm gap according to manufacturer’s details, excluding main steel structural framing & finishes.
