UCO DecoWood – Decking
Uco DecoWood can be installed on metal and timber frame structures. The spacing of the framing or joint is 400mm – 600mm c/c. Refer to Uniform Load table for recommended joist spacing.
Installation of UCO DecoWood on Metal and Timber Framing
UCO DecoWood – Wall Cladding
Uco DecoWood can be installed on both galvanized steel stud and Aluminum hollow section as frame. The spacing of the framing is maximum 610mm c/c. At the beginning of various fixing methods, measure and mark the position of screw holes on UCO DecoWood. Pre-drill with a smaller diameter drill bit, then a larger diameter drill bit to form 1mm diameter hole larger than screw diameter.
Installation of UCO DecoWood and Metal Framing
Installation of UCO DecoWood and Aluminum Framing
Direct Fixing onto the Internal Wall